Справочник Пользователя для Inkmachines Sweden AB SCPOWER
Service and maintenance
InkMachines
TPS-500
Rev 3.0 / 2018-05-25
27 (27)
Service and maintenance
Self-service and repairing of the
TPS-500
and/or any of its units are prohibited and the warranty will be void
if any unit has been opened or manipulated. The only exception is cleaning of the Foot switch, replacement of
the battery in the Foot switch and resetting the Powerpack.
the battery in the Foot switch and resetting the Powerpack.
Caution! Changes or modifications
not approved by the manufacturer could void the user’s authority to
operate the product.
Software upgrades
For information about Software upgrades check
The current software version will be displayed in the left corner at start-up of the Main unit.
Exchange of foot switch battery
The foot switch is equipped with a CR2450 battery. To
exchange the battery, you need to dismount the unit. The
foot switch consists of:
exchange the battery, you need to dismount the unit. The
foot switch consists of:
Exchange the battery according to below instruction.
1.
Clean the foot switch before
dismounting the unit. When the unit is opened also clean it inside, but do not use liquid
near the electrical board.
near the electrical board.
2. Release the two screws(f) located on the bottom plate(b) of the foot switch. Use a screw
driver to release the screws.
a. Upside cover
b. Bottom plate
c.
Electrical board
d. Spring
e. Battery
f.
Screw
+
-
a
b
f
c
d
e
f