Справочник Пользователя для Fibar Group S.A. FGBHFS101
4
PoweRinG THe ACCeSSoRY
#2: Powering the accessory
1. Turn the cover counter-clockwise and open it.
2. Remove the battery blocker.
3. The accessory will glow red – it is ready to be paired.
4. Close the cover and turn it clockwise.
4. Close the cover and turn it clockwise.
NOTE
After completing
installation it is rec-
ommended to test
sensor’s operation by
placing the entire sen-
sor or sensor probe
onto a water surface.
i
NOTE
if the accessory blinks
green after powering,
it is already paired and
has to be reset to pair
again.
i