Справочник Пользователя для Fibar Group S.A. FGBHFS101
7
ReSeT
Resetting the Flood Sensor to factory defaults:
Reset procedure allows to restore the accessory back to its factory
Reset procedure allows to restore the accessory back to its factory
settings including HomeKit pairing. we recommend performing re-
setting procedure within range of your ioS device’s Bluetooth®.
1. open the cover.
2. Press the button 3 times then press and hold the button.
1. open the cover.
2. Press the button 3 times then press and hold the button.
3. wait for the LeD indicator to glow yellow.
4. Release the button.
5. Click the button to confirm.
6. After resetting the accessory will glow red - it is ready to be paired
4. Release the button.
5. Click the button to confirm.
6. After resetting the accessory will glow red - it is ready to be paired
again.
NOTE
if reset procedure
was performed out-
side ioS device’s
Bluetooth
Bluetooth
®
range the
accessory will not be
removed from the
HomeKit app and will
not respond. in this
case remove the de-
vice manually from
the app.
i
#5: Reset
Button