Справочник Пользователя для Fibar Group S.A. FGGC001

6

BASIC ACTIVATIOn

1.  Remove the front magnetic cover.

2.  unmount the Swipe from the back case by sliding the device 

down.

3.  Remove paper strip protecting the batteries.

4.  Mount the Swipe back into the back case by sliding the device up.

5.  The device will confirm powering up with an acoustic signal.
6.  Place the front magnetic cover.

7.  Place the Swipe onto its holder.

8.  Place the Swipe within the direct range of your Z-Wave controller.