Справочник Пользователя для Levven Electronics Ltd. LASR50
Soul Bar
Read & Save These
Operating Instructions
Instructions
Page 10 of 25
4
U
SING
S
OUL
B
AR
4.1
M
ODES
Soul Bar has 3 modes of operation. Click the gear button to cycle
between modes.
between modes.
1. SKAA Receive Mode
In this mode, Soul Bar will receive audio from any SKAA
transmitter.
transmitter.
2. Bluetooth Receive Mode
In this mode, Soul Bar will receive audio from any Bluetooth
device including smartphones, tablets, TVs, PCs, and many others.
Soul Bar works as an ordinary Bluetooth speaker. Click the
Bluetooth button to pair with your phone. Hold the Bluetooth
button to clear the paired list.
device including smartphones, tablets, TVs, PCs, and many others.
Soul Bar works as an ordinary Bluetooth speaker. Click the
Bluetooth button to pair with your phone. Hold the Bluetooth
button to clear the paired list.
3. Bluetooth Relay Mode
In this mode, Soul Bar works the same as Bluetooth receive mode
and rebroadcasts the audio to up to 4 additional SKAA receivers.
and rebroadcasts the audio to up to 4 additional SKAA receivers.
4.2
C
LUSTERING
Clustering is a way to synchronize the bonding and volume of multiple
SKAA receivers. When these products are clustered together, any change
in bond or volume happens to both products simultaneously. When
clustered, they function as though they are a single device. One device
behaves as the master of the cluster and any change in volume or bond
to the master is reflected automatically to the slave devices.
SKAA receivers. When these products are clustered together, any change
in bond or volume happens to both products simultaneously. When
clustered, they function as though they are a single device. One device
behaves as the master of the cluster and any change in volume or bond
to the master is reflected automatically to the slave devices.
4.2.1 C
LUSTERING
P
ROCEDURE
To cluster Soul Bar to another SKAA receiver with Soul Bar being the master
and the other device being the slave, follow these steps:
and the other device being the slave, follow these steps:
1) Power off both devices.
2) Place the master within 6 feet (2 metres) of the slave.
3) Make sure all SKAA transmitters within 80 feet (25 metres) are
2) Place the master within 6 feet (2 metres) of the slave.
3) Make sure all SKAA transmitters within 80 feet (25 metres) are
powered off.
4) Power on the master by inserting the AC power cord into the
AC power jack.