Справочник Пользователя для Guided Therapeutics Inc 13500
November 2013, CNDS-0-635-MAN_3
Page 37 of 78
8.2 Transporting LuViva
LuViva weighs approximately 125 lbs. (57kgs). The preferred method for moving LuViva up or down stairs or over
rough terrain is with it disassembled and in its original packaging.
CAUTION: The LuViva handle is designed to roll and push LuViva. The handle may be used to lift the
LuViva out of the shipping container and to move over thresholds.
Disassembly
Turn off LuViva and unplug LuViva from the wall outlet. Disconnect the cables from the monitor. Remove the
Turn off LuViva and unplug LuViva from the wall outlet. Disconnect the cables from the monitor. Remove the
touchscreen from the top of the Base Unit. Remove the monitor arm. Open the Base Unit Cover, open the lamp access
panel and remove the lamp assembly. Close the Back Access Panel. Place the Base Unit, Touchscreen, Lamp Assembly,
panel and remove the lamp assembly. Close the Back Access Panel. Place the Base Unit, Touchscreen, Lamp Assembly,
and Base Unit Cover back into their original packaging. Move the packages to the new location. Reassemble LuViva in
the new location following the assembly instructions provided in the “Using LuViva for the First Time” section in this
the new location following the assembly instructions provided in the “Using LuViva for the First Time” section in this
manual.
8.3 Transporting LuViva for Service
If service is required, contact distributor for a reusable service case for product return.
9. Troubleshooting Guide
9.1 Common Errors
Problem/Indication
Possible Causes
Operator Action(s)
LuViva will not turn on.
LuViva is not plugged into
an appropriately rated wall
outlet.
an appropriately rated wall
outlet.
LuViva needs 100-240V/50-60Hz AC
current in order to operate.
current in order to operate.
Main Power Switch of the
Base Unit is turned off.
Base Unit is turned off.
Remove Base Unit Cover, flip Bottom
Switch on at the back of LuViva Base
Switch on at the back of LuViva Base
Unit, and replace cover.
Bulb Access door is open.
Remove Base Unit Cover. Close the bulb
access door. If the Access door is opened
access door. If the Access door is opened
during operation, LuViva will turn off.
Power Up Sequence not
performed in designated
performed in designated
order.
Unplug LuViva and turn all switches to
the off position. Follow the Set-Up
the off position. Follow the Set-Up
Assembly steps to activate LuViva.
If after performing all of the above troubleshooting actions
LuViva will still not turn on, please contact Customer Service
for further instructions.
Touchscreen will not turn on.
Indicated by dark touchscreen.
Indicated by dark touchscreen.
Touchscreen installed
without attaching Power
Cables
without attaching Power
Cables
Pivot monitor to examine the rear cable
connections. Check that the USB, video,
audio and power cables from the Base
connections. Check that the USB, video,
audio and power cables from the Base
Unit are plugged into the touchscreen.
Remove Base Unit cover and confirm
Remove Base Unit cover and confirm
cable connections are made at the front
left corner of the base unit.
left corner of the base unit.
Touchscreen is on, but LuViva
screen is not displayed
screen is not displayed
Touchscreen installed
without attaching USB
without attaching USB
Cable
Power Up Screen is Windows
desktop.
desktop.
Software error during
booting.
booting.
Contact Customer Service for further
instructions.
instructions.