Справочник Пользователя для Shenzhen AlldoCube Technology and Science Co. Ltd U25GT

 

 

shows: 

Connect the device with PC,the system will turn on the device automatically(it only supply 

power and don't charge). 

 

Power saving & screen-lock：turn on the device and short press“POWER” button to enter SLEEP power 

saving mode,at this time,the screen become black screen, and also enter screen lock mode.Press “POWER” 

button again ,the system resume bright screen within 1s. 

 

1.Under power saving mode, the original operations such as music,video etc will not pause and will 

continuously work ,it only clock the screen to be at the status of black screen. 

2.When the system hangs up,press "power switch" button  for 10s so that the device resume 

to turn off, and press "power switch" again,it will turn on. 

 
z

 Power off 

Under the power-on status ,long press "power button" for 3s, power-off menu will show,select "OK" to turn off the 

player. 
【Notice】When power is not enough,the device will continuously give an alarm ,it will automatically power off if 
no charging;if don't turn it on,please check the power status,try to turn it on within 5 minutes to 10 minutes 
after it is charging if power is out of use.   
z

 Using TF expansion card 

1、Connect the player with your PC, it will appear 2 Removable Disk, the first one is build-in flash 

memory, the other one is TF card. The second Removable Disk will not be opened if you did not plug a TF 
expansion card to the player. 
  Notice:the player only supports TF kind of expansion card (maximum memory:32GB).

2、Plug expansion card   

To Plug: Insert the expansion card as the indication near the card slot. Once the player identifies the 

expansion card, Files stored in the card memory can be played.     
  To Unplug: Press the expansion card slightly and remove it.   
z

 Charging the battery 

1、For best results, let it charge for about 5 to 6 hours during the first use, to confirm the full power 

and then use it.