Справочник Пользователя для IDEAL INDUSTRIES SCDMET1000
Product Manual
SCDMET1000 –Luminaire Controller 0-10V
ND xxxx-1 01/2016
Users Manual – SCDMET1000 Luminaire Controller
Page 3
www.idealindustries.com
The LOAD(red) and Neutral(White) wire are 18 AWG solid copper conductors.
1.
1.
Strip wires to 1/2”.
2.
Connect Smart Connector LOAD wire to the ballast hot line with appropriate sized wirenut or
push-in connector if necessary.
3. Connect Smart Connector NEUTRAL Output to the ballast neutral with appropriately sized
wirenut or push-in connector if necessary.
4.
For feed-through (i.e., “daisy-chain”) installations, connect the LOAD hot feed-through
conductor into the wirenut in step 2. Also, connect the NEUTRAL Output feed-through
conductor into the wirenut in step 3.
conductor into the wirenut in step 3.
DIM Connector
The DIM wires are18 AWG solid copper conductors.
1.
The DIM wires are18 AWG solid copper conductors.
1.
Strip wires to 1/2”.
2.
Connect positive/(+)/purple DIM wire from Smart Connector to positive/(+)/purple wire from
dimming ballast with appropriate sized wirenut or push-in connector if necessary.
3.
Connect negative/(-)/grey DIM wire from Smart Connector to negative/(-)/grey wire from
dimming ballast with appropriate sized wirenut or push-in connector if necessary.
PROGRAMMING
Refer to the Audacy™ system configuration manual to associate smart connectors to other
devices and to set up operating parameters for the Audacy™ lighting control system
devices and to set up operating parameters for the Audacy™ lighting control system