Справочник Пользователя для IDEAL INDUSTRIES SCL1000
Product Manual
SCL1000 – Smart Connector
ND 7941-3 02/2014
Users Manual – SCL1000 Smart Connector
Page 3
www.idealindustries.com
4.
For feed-through (i.e., “daisy-chain”) installations, insert the LINE hot feed-through conductor
into the other black line port. Insert the LINE neutral feed-through conductor into the other
unmarked LINE port. See Fig. 2.
unmarked LINE port. See Fig. 2.
5.
After LINE wire installation, the supply power can safely be disconnected and re-connected
without re-installing the wires. To disconnect the supply power, firmly grip the LINE
connector and pull to separate it from the main body of the Smart Connector. To re-
connect, simply push the LINE connector into the corresponding port on the Smart
Connector.
connector and pull to separate it from the main body of the Smart Connector. To re-
connect, simply push the LINE connector into the corresponding port on the Smart
Connector.
LOAD Connector
The LOAD Connector accepts 18 AWG copper conductors, solid or stranded (16 strands
or less).
Use only one conductor per port and ensure that no copper is exposed on any of the
wires after installation.
1.
Strip the wires to 3/8”.
2.
Grip the LOAD hot wire and firmly push conductor into the port marked with the black stripe.
See Fig. 2.
3.
Grip the LOAD neutral wire and firmly push conductor into the unmarked port. See Fig. 2.
4.
After LOAD wire installation, the load can safely be disconnected and re-connected without
re-installing the wires. To disconnect the load, firmly grip the LOAD connector and pull to
separate it from the main body of the Smart Connector. To re-connect, simply push the
LOAD connector into the corresponding port on the Smart Connector.
separate it from the main body of the Smart Connector. To re-connect, simply push the
LOAD connector into the corresponding port on the Smart Connector.
DIM Connector
The DIM Connector accepts 18 AWG copper conductors, solid or stranded (16 strands
or less).
Use only one conductor per port and ensure that no copper is exposed on any of the
wires after installation.
1.
The DIM Connector accepts 18 AWG copper conductors, solid or stranded (16 strands
or less).
Use only one conductor per port and ensure that no copper is exposed on any of the
wires after installation.
1.
Strip wires to 3/8”.
2.
Grip positive/(+)/purple DIM conductor and firmly push into the port marked “1”. See Fig. 3.
3.
Grip negative/(-)/gray DIM conductor and firmly push into the port marked “2”. See Fig. 3.
4.
After DIM wire installation, the DIM connector can safely be disconnected and re-connected
without re-installing the wires. To disconnect the DIM connector, firmly grip the DIM
connector and pull to separate it from the main body of the Smart Connector. To re-
connect, simply push the DIM connector into the corresponding port on the Smart
Connector.
connector and pull to separate it from the main body of the Smart Connector. To re-
connect, simply push the DIM connector into the corresponding port on the Smart
Connector.