Справочник Пользователя для BMT Holdings Pty Ltd A310V6
BMM
®
System
Manual
– Blast Anytime BMM Activator
4
www.bmt.com.au
2.5.2 Delay in BAT Mode
• When a transmit delay is set in BAT mode, the BMM transmits for approximately 15 minutes.
• It then enters a dormant-state for 30 minutes (this reduces the likelihood of heavy machinery
• It then enters a dormant-state for 30 minutes (this reduces the likelihood of heavy machinery
triggering the BMM), after which it enters standby mode
—ready to sense a blast. Upon
sensing a blast, the BMM switches to sleeping for the set delay hours. Once the delay hours
are over, the BMM transmits until the battery runs out of power.
• Calculate the delay, in hours, from blast detonation to the BMMs transmitting.
WARNING
Once set, a BMM delay cannot be changed. That is, the
BMM cannot be switched off or made to switch on earlier
or later.
2.6 Charging the Battery
The Activator comes with an internal Lithium battery that is rechargeable via the micro USB port
behind the silicone enclosure.
• The battery level indicator on the screen is shown as 4 bars, where
each bar represents 25% battery capacity.
• The battery can only be charged via the micro USB port, and
cannot be accessed nor removed.
• We recommend using a micro USB charger that is connected to
mains power. It can also be charged using a computer USB port
and USB to micro USB cable.
WARNING
If the battery is fully discharged, use a mains power micro
USB charger to recharge the Activator battery.
2.7 Transporting the Activator and BMMs
• We recommend not to carry a BMM Activator in the same bucket/bag as BMMs.
3
A
CTIVATOR
L
ICENCE
R
EGISTRATION
The Activator needs a valid licence, which is set at the BMT factory to match your Package type
• Standard, Blast Anytime, or Integrated Survey
• Blast Anytime BMMs
• Normal BMMs
At Package renewal or upgrade, the Activator will need the licence renewed.
Charge the Activator using the
micro USB port.
Carry the activator separately to BMMs at all times.