Справочник Пользователя для SHEN ZHEN XING YAO HUA INDUSTRIAL CO. LTD T6AH-2400

◇

To Access Servo Reversing

Turn the power on and press the DOWN and SELECT keys simultaneously to enter 
the function mode.
Press the UP and DOWN keys until REVERSING SW appears on the screen.
Press the SELECT key to select the desired channel, and then press the INCREASE
 or DECREASE key reverse or normal servo direction.

◆Travel Asjustment

Insert English instruction 26 page below

◇To Access Travel Adjustment

Turn on the power and press the DOWN and SELECT keys to enter into the function

 model    press the UP or DOWN key until TRAVEL ADJUST appears on the screen.

 Press    selected key to move cursor arrow to the desired channel.

 

◆

Only aircraft adjust for HELI, just have this feature setup.

T7AH-2400 offers four independent pitch curves, each with up to five adjustable 

points. This function allocates a separate pitch curve setting during normal, stunt 

1, stunt 2 and hold modes. Once the pitch curves are adjusted, each can be

activated in flight using the three-position flight mode and throttle hold switches.

 Each of the five points of the pitch curve are independently adjustable from 0–

100%. These five points correspond to low, 25%, mid, 75% and high stick positions. 

See Page 94 for more details on setting up pitch curves.

◇To Access the Pitch Curve Function
Turn the power on and press the DowN and SELECT keys simultaneously to enter
 the function mode.
Press the UP or DOWN key until PITCH CURVE NORM appears on the screen.
Press the SELECT key to select the stick position that you wish to adjust the pitch.
● L = Low
● 1 = 25%
● 2 = 50%
● 3 = 75%
● H = High
Press the INCREASE or DECREASE key to adjust the pitch position.

Recommended Initial Pitch Settings
● L= -4º
● 2= 5º
● H= 9º
Note: For more information about setting up pitch curves, see continue pages.

◆Adjust the three sections of switch with corresponding normal model under the 
throttle curve Only aircraft adjust for HELI, just have this setup function.

[REVERSING  SW]

GEAR

Press to select REV. or NORM

Press to enter REVERSE

Press to enter
Function Mode

Press to select
desired channel

NORM

 ch 1    2   3   4   5   6    7

REV.

[TRAVEL  ADJUST]

THRO

  H  100%

L  100%

ELEV

D  100%

U  100%

AILE

  L  100%

R  100%

RUDD

L  100%
R  100%

Selected channel

Press to enter
TRAVEL ADJUST

Press to enter
Function Mode

Press to return
value to default

Press to select
desired channel

Press to adjust value

[PITCH  CURVE]

Point-3

51

51

INH

1

2

3

H

L

IN

Press to enter
PITCH CURVE

Press to enter
Function Mode

Press to select
desired points

Press to change 

OUT

NORM

"ACRO" appear alternately, if not show "the YES-> CLEAR KEY, it means the 

current plane is the type, if not be, it means you can choose the aircraft type by 

pressing CLEAR key.