Справочник Пользователя для Flyingvoice Technology Co. Ltd. FIP11WP

FLYINGVOICE

Page 8 of 86

Installing

2.1 Assembling the Phone and Connecting to the Network

1) Plug one end of the coiled phone cord into the left side of the phone base.

2) Plug the other end of the handset cord into the jack at the bottom of the handset.

3) If you are using an external power source, push the power cord into the power supply, and plug the power supply into the phone base unit.

Note: Use only the power supply that came with the phone.

4) Plug the Ethernet cable into Internet port in the rear side of the base station. Plug the other end of the Ethernet cable into your already

prepared network connection.

2.2 Mounting the Phone to the Wall

1) Complete the assembly instructions.

2) Attach two appropriate screws to the wall. Leave 1/4 distance from the wall. This allows you to slide the mounting brackets on to the screws.

Push down slightly to lock the phone in place.

2.3 Turning on the Phone

This section assumes that the correct connections have been made.

1) Check whether the Internet port is well connected.

2) Plug the AC power adapter into the electrical outlet.

Note: Use only the adapter that came with the phone.

3) The LCD will firstly display “Welcome” and all of the lights on the phone will flash.

4) Next, the LCD display “Initializing Network”.