Справочник Пользователя для Soundmax Electronics Limited CMS4
Radio (AM/FM/Weather Band) Operation
World Tuner
This unit is initially set to USA frequency intervals
of 10 kHz for AM and 200 kHz for FM. When using
it outside the USA, the frequency reception range
can be switched to the intervals below.
of 10 kHz for AM and 200 kHz for FM. When using
it outside the USA, the frequency reception range
can be switched to the intervals below.
AM
FM
Frequency
spacing
Frequency
range
Frequency
spacing
Frequency
range
U.S.A
standard
Aisa
standard
Europe
standard
10kHz
9 Hz
k
9 Hz
k
530-1710
kHz
531-1620
kHz
531-1602
kHz
200 Hz
k
50 Hz
k
50 Hz
k
87.9-107.9
MHz
87.5-108
MHz
87.5-108
MHz
Australia
standard
standard
9 Hz
k
531-1620
kHz
100 Hz
k
87.5-108
MHz
Auto Seek
Manual Seek
Press the [ / ] buttons to automatically
search for the next radio station.
search for the next radio station.
Rotate the [MENU] knob to manually change
intervals step by step.
intervals step by step.
Tuner Settings
Press the [ MENU ] knob to access the Tuner
settings menu. Use the [ MENU ] knob to select
the below functions:
settings menu. Use the [ MENU ] knob to select
the below functions:
Presets
Rotate the [MENU] knob to select which preset
station to listen to, then press [MENU] knob to
confirm.
station to listen to, then press [MENU] knob to
confirm.
Save As Preset
Auto Store
Local On/Off
RDS On/Off
PTY
Use the [ MENU ] knob to select the preset
position to save the current frequency.
position to save the current frequency.
Only stations with sufficient signal strength will
be detected and stored as a preset. Press the
[MENU] knob to automatically select ten strong
stations and store them into ten presets. The
new stations replace presets.
be detected and stored as a preset. Press the
[MENU] knob to automatically select ten strong
stations and store them into ten presets. The
new stations replace presets.
To receive more radio stations or only stations
with strong signal, you can adjust the tuner
sensitivity.
with strong signal, you can adjust the tuner
sensitivity.
Press the [ MENU ] knob to turn On or Off the
RDS Mode.
RDS Mode.
Use the [MENU] knob to select the desired PTY
mode.
mode.
Press the [ MENU ] knob to turn On or Off the
Local Seek Mode.
ON - Only stations with a strong signal can be
played back.
OFF - Stations with strong and weak signals can
be played back.
Local Seek Mode.
ON - Only stations with a strong signal can be
played back.
OFF - Stations with strong and weak signals can
be played back.
CMS4
10
E
n
g
lis
h
O
w
n
e
r’s
M
a
n
u
a
l