Справочник Пользователя для Intel Corporation ND1
Linux Configuration
Intel® Edison
September 2014
Quick Start Guide
Document Number: EQSG-ww29
Intel Confidential
15
Figure 7
Linux > Edit connections
Depending on how many wired connections you have, the wired connection to the Intel® Edison board will usually be
the most recently created one, with the highest identifier. In this case, it is Wired Connection 3. You can verify which
wired connection is the correct one by going to the dropdown menu shown above, and seeing which connection has
“edison” in the name.
the most recently created one, with the highest identifier. In this case, it is Wired Connection 3. You can verify which
wired connection is the correct one by going to the dropdown menu shown above, and seeing which connection has
“edison” in the name.
After determining which wired connection the Intel® Edison board is connected to, highlight it and click Edit
(Figure 8).
(Figure 8).
Figure 8
Linux > Network connections
Go to the IPv4 Settings tab and click Add (Figure 9). Enter the following information:
•
IP Address: 192.168.2.1
•
Netmask: 255.255.255.0
•
Gateway: 0.0.0.0