Справочник Пользователя для Digital China Networks Limited WL8200-I2
Wireless Access Point
Installation Manual Chapter 3 AP Installation
Installation Manual Chapter 3 AP Installation
3-6
User can use the Ethernet cable to connect the Ethernet interface of the AP and the
switch which supports PoE function to power to the AP.
WL8200 series adopts the 802.3af/802.3at PoE power supply. When the USB is not
used, it adopts the 802.3af PoE power supply; if the USB is used, it should adopt the
802.3at PoE power supply. The device provides two Ethernet interfaces of LAN1 and
LAN2. Only LAN1 provides PoE power function as below. The marks of the two interfaces
are LAN1 and LAN2 respectively. When the network cable is plugged in, please plug the
PoE cable in the LAN1.
Fig 3-8 POE power supply interface
3.5.3 Local Power
WL8200 series can also adopt the power adapter for power supply. The power
adapter uses 12V DC power and please ensure if the adapter is chosen correctly before
powering on.
The power adapter and the power cord are not provided; user should choose to buy
them.
Table 3-1 power adapter specifications
Items
Explanation
power adapter input
100-240V AC
power adapter output
+12V
2A
3.5.4 Checking after Power
Check if the LED of AP works normally after connecting the power. The explanation of
LED status is seen in the product spec.