Справочник Пользователя для Esprinet S.p.A. RC60
3
-Dark grey key: photo camera starts
-Light grey key: stop
Photo camera/ Remote controller pairing
To match the functions of the remote controller with those of F-60 video camera, perform the following operations:
-Turn off the video camera and press the red STOP key
- Turn on the video camera
- Release the Stop key within 5 seconds and press the green and the light grey keys on the remote controller at the same time
After successful code pairing, F-60 video camera generates a tick tone twice.
-Light grey key: stop
Photo camera/ Remote controller pairing
To match the functions of the remote controller with those of F-60 video camera, perform the following operations:
-Turn off the video camera and press the red STOP key
- Turn on the video camera
- Release the Stop key within 5 seconds and press the green and the light grey keys on the remote controller at the same time
After successful code pairing, F-60 video camera generates a tick tone twice.
OUTPUT INTERFACES
F-60 Photo camera has 2 audio video output interfaces:
-Av, Hdmi
And one data files output:
-Usb
Video Out
You can connect the photo camera to a video interface, through the AV output, by using the cable supplied.
Once connected, the video camera can perform all its functions.
The display or the TV, connected to the video camera, works exactly like the TFT display of the video camera.
F-60 Photo camera has 2 audio video output interfaces:
-Av, Hdmi
And one data files output:
-Usb
Video Out
You can connect the photo camera to a video interface, through the AV output, by using the cable supplied.
Once connected, the video camera can perform all its functions.
The display or the TV, connected to the video camera, works exactly like the TFT display of the video camera.
Usb Interface
The USB connection allows to:
-Give power supply to F-60 video camera
- Connect the video camera to a computer in order to read the data in its memory and micro SD card.
The USB connection allows to:
-Give power supply to F-60 video camera
- Connect the video camera to a computer in order to read the data in its memory and micro SD card.
INSTALLATION AND USE OF A BACKUP BATTERY
F-60 photo camera can use a backup battery to be installed in place of the TFT display
You can install the battery for the power supply without setting any parameter. You only need to remove the TFT display and
replace it with the backup battery, as shown in the following figure:
You can install the battery for the power supply without setting any parameter. You only need to remove the TFT display and
replace it with the backup battery, as shown in the following figure:
PRECAUTIONS
Precautions for the waterproof case
The waterproof case is a precision component. Please use the following precautions:
Precautions for the waterproof case
The waterproof case is a precision component. Please use the following precautions:
•
Do not randomly dismount and mount the O-ring of the case, keys and lens cover without assistance, otherwise the
waterproof performance deteriorates.
waterproof performance deteriorates.
•
Do not put the case in a place where corrosive gases are easily generated due to the existence of strong acid or alkali
and keep it away from chemical or corrosive substances.
and keep it away from chemical or corrosive substances.
•
Do not store the product in a place where temperature is too high (over 50°C) or low (-10°C) for a long time to avoid
deformation.
deformation.