Справочник Пользователя для SHENZHEN MINEW TECHNOLOGIES CO. LTD. MS47SF1

the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. 

6. Separate approval is required for all other operating configurations, including portable configurations with 

respect to FCC Part 2.1093 and different antenna configurations.   

7. A certified modular has the option to use a permanently affixed label, or an electronic label. For a 

permanently affixed label, the module must be labelled with an FCC ID: 2ABU6-MS47SF1. The OEM manual 

must provide clear instructions explaining to the OEM the labelling requirements, options and OEM user 

manual instructions that are required. 

For a host using a this FCC certified modular with a standard fixed label, if (1) the module’s FCC ID is not 

visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward 

commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an 

additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID: 

2ABU6-MS47SF1” or “Contains FCC ID: 2ABU6-MS47SF1” must be used. The host OEM user manual must 

also contain clear instructions on how end users can find and/or access the module and the FCC ID. 

 

8. Host product is required to comply with all applicable FCC equipment authorizations regulations, 

requirements and equipment functions not associated with the transmitter module portion. compliance must be 

demonstrated to regulations for other transmitter components within the host product; to requirements for 

unintentional radiators (Part 15B). To ensure compliance with all non-transmitter functions the host 

manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. If a 

host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure 

without a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring 

that the after the module is installed and operational the host continues to be compliant with the Part 15B 

unintentional radiator requirements. Since this maydepend on the details of how the module is integrated with 

the host, we suggest the host device to recertify part 15B to ensure complete compliance with FCC 

requirement: Part 2 Subpart J Equipment Authorization Procedures , KDB784748 D01 v07, and KDB 997198 

about importation of radio frequency devices into the United States. 

 

The end product with an embedded Module may also need to pass the FCC Part 15 unintentional emission 

testing requirements and be properly authorized per FCC Part 15. 

 

Note: If this module is intended for use in a portable device, you are responsible for separate approval to 

satisfy the SAR requirements of FCC Part 2.1093. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. Changes or modifications made to this equipment 

not expressly approved by Shenzhen Minew Technologies Co.,Ltd. may void the FCC authorization to operate 

this equipment.