Справочник Пользователя для Cyrus Audio Ltd. JG12
Cyrus Pre
DAC
User Instructions
11
Display mode
There are three modes of display operation.
There are three modes of display operation.
factory Settings
You can restore the configuration of your amplifier to the
factory original settings, changing the input names to those
listed above, setting the display mode to ‘small input names’
and setting all input sensitivity trim settings to 0dB.
To restore the settings, first disconnect the power cord from
To restore the settings, first disconnect the power cord from
the amplifier. Hold down the setup key on the front panel
and re-connect the power cord.
The ‘small input’ setting will show a
three line display with the volume
reading at the top of the display,
the selected input in the display
centre and the current sample
rate/lock status at the bottom
when a digital input is selected.
The ‘large input’ setting will show
The ‘large input’ setting will show
a two line display with the volume
reading at the top and a larger
input legend below.
The ‘large volume’ setting will
The ‘large volume’ setting will
display large volume characters at
the bottom of the screen with the
bargraph above.
Input sensitivity offset
It is possible to adjust the relative
Input sensitivity offset
It is possible to adjust the relative
sensitivity of individual inputs
by selecting the appropriate
trim option from the menu. This
enables the volume level when
playing low or high output source
components such as tape decks or
tuners to be equalized between
system sources.
-27
CD
-27
-27dB
Offset
Input 7
+4dB
-27
CD
Sample rate 44.1kHz