Справочник Пользователя для Shenzhen Unique Electronic Int'l Limited MS3398
20
If the U-disk is almost full, occupied room can be released by emptying/deleting some files.
A target file is protected by system and prevented from being deleting. In this case, the file that is wanted
to be deleted should be deselected and then deleted.
A target file is protected by system and prevented from being deleting. In this case, the file that is wanted
to be deleted should be deselected and then deleted.
----------------------------------------------------------------------------------------------------------------------
Format a U Disk
Note 1: The format function is a quick way to empty a whole U Disk.
Note 2: Please format the U Disk once before the first time of use.
Note 2: Please format the U Disk once before the first time of use.
Caution:
1. Format operation will erase all data on the disk.
2. Format operation is not undoable. It is strongly recommended to back up the data
before format operation.
2. Format operation is not undoable. It is strongly recommended to back up the data
before format operation.
----------------------------------------------------------------------------------------------------------------------
Data batch
The scanner starts storing barcode data in Date Batch mode. The collected barcode data can then be
sent to a host via Bluetooth/USB. Three options are listed below.
sent to a host via Bluetooth/USB. Three options are listed below.
Send batch data- Data transmission is triggered by this menu command. Before undertaking this
operation, make sure a communication link (Bluetooth network or USB cable) is working.
Interfaces- There are three communication interfaces: Bluetooth, USB HID keyboard, USB virtual
COM. A Bluetooth link is needed in the first case (See System SettingÆBluetooth).
Data statistics- User can select to enable/disable the Data Statistics. When it is enabled, the number
of a barcode would be added to the end of the barcode. The eighth barcode is “123456789” in the
example below.
Example:
operation, make sure a communication link (Bluetooth network or USB cable) is working.
Interfaces- There are three communication interfaces: Bluetooth, USB HID keyboard, USB virtual
COM. A Bluetooth link is needed in the first case (See System SettingÆBluetooth).
Data statistics- User can select to enable/disable the Data Statistics. When it is enabled, the number
of a barcode would be added to the end of the barcode. The eighth barcode is “123456789” in the
example below.
Example:
5-3 System Setting - Bluetooth
5-3-1 Bluetooth functionalities
The scanner can be configured to send data to a PC/Notebook/PDA/other instrument which has an
integrated Bluetooth module or is connected with an external Bluetooth USB adapter. A diagram of
Bluetooth functionalities and a table of various Bluetooth profiles are shown below, respectively:
integrated Bluetooth module or is connected with an external Bluetooth USB adapter. A diagram of
Bluetooth functionalities and a table of various Bluetooth profiles are shown below, respectively: