Справочник Пользователя для Powerwerx Inc. TR505

TERA

TR-505

20

NOTE: this function is disabled when radio is shipped from the factory.  The channel 

scan function may be turned ON with the optional programming software and cable. To 

enable this function, go into the programming software and select which channels you 

would like to scan by selection “Yes” in the Scan Add column.  You can scan from 2-15 

channels. To start the channel scan mode, rotate the top mounted channel selector 

knob on the radio to channel “16” and the radio will begin to scan your pre-selected 

memory channels. To answer a calling station when scanning, press the radio’s PTT 

button and talk. The radio will transmit on the last received channel while in the scan 

mode.  The scan feature will then auto resume channel scanning after 5 seconds of your 

last transmit or receive audio activity on that channel.  Channel “16” is not available for 

a memory channel if the scan function is enabled for use. 

The radio’s small side keys are programmed from the factory to the following:   

Top small key: Short Press: Battery Level, Long Press: Channel Lock.   

Bottom small key: Short press: Select TX Power level, Long Press: Monitor function 

on. The radio’s side keys may be re-programmed to perform other functions with the 

optional programming software and cable.