Справочник Пользователя для Powerwerx Inc. TR505D

TERA

TR-505

Wired Clone

1. Turn clone function by programming software or

contact your local dealer.

2. Connect source radio and target radio with clone cable,

and turn target radio on.

3. Hold down [Side Key] on Source Radio, then power

it up. About 3 seconds later, the LED glows red,

which means the Source Radio is ready for cloning.

4. Press [Side Key] on Source Radio again, and the

LED on Source Radio flashes red and LED on Target

Radio flashes green.The LED on Target Radio goes

out when the cloning is finished.

5. Replace the Target Radio with another, then press

[Side Key] on Source Radio to begin cloning.

Tip

If the LEDs on both Source Radio and Target Radio flashes red and green alternatively, it means

the cloning has failed.

Source Radio Target Radio

TERA