Справочник Пользователя для UTStarcom MSG2000

Preliminary

Configures switch with commands specified in the file.

file : the special raw registers file.

Dumps the registers of the switch.

Dumps the registers of the PHY chip.

Dumps the registers of the port routing chip.

Displays the current fswcmd version. For example:

Dump mac info, displays the mac table entries in the fabric switch. When mac 

address learning is enabled on PP50, you may track a host of mac addresses and 

their states along with the cache values. 

Verbose displays only the count of mac table entries.

Shows all mac table info or specified number of entries.

Enables or disables mac-learning on port.

Globally enables or disable flooding of broadcast, multicast and unicast frames.

fswcmd cfgreg <file>

fswcmd dump switch {global|port <port>}

fswcmd dump phy {extxg1|extxg2}

fswcmd dump route

fswcmd show version

root@cnode-pp50:/usr/bin fswcmd show version

  Switch      type ----------Tahoe::2112

  Silicon  version ----------A5

  Firmware version ----------pp50-ipmc-v2.3.3d01

fswcmd dump mac-info verbose | all | <number of entries (1 - 16384)

fswcmd enable | disable mac-learning <port>| all

fswcmd enable | disable flooding broadcast | multicast | unicast