Справочник Пользователя для SISTEMAICADOS USA LLC Q-38
11
Contrast: Adjust the displaying contrast.
Keypad backlight time: Set the duration for keypad backlight.
Auto keypad lock: Set to lock the keypad.
13.4. Security
The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone when
leaving the factory is 1234.
leaving the factory is 1234.
The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator.
PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)
Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.
Modify the cell phone password: You can change the phone password.
Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.
Lock screen by end-key: Activate, in the idle mode, you can use the power-key to lock the screen.
Guard lock: You can track your phone when the phone lost; The default password is “123456”
Fixed dialing: Add the numbers for fixed dialing.
Black list: You can check the blacklist in here, and also can set the feature whether need to act on calling or messaging.
14. Profiles
Enter in the function; display the profile mode list including Normal, Silent, Indoor and Outdoor.
Activate: Press OK key to activate the profile mode.
Settings(Customize the profile mode as following):
Rename: Change the profile mode’s name.
Ring settings: Select the ringtone for the SIM1/SIM2. You can also select the ringtone from T card.
Adjust volume:Set the volume for Caller Volume, Message Volume, Alarm & calendar ringtone, Call volume, Power ringtone.
Ring Type: Set the ring type such as Ringtone, Silent..
Other alert rings: Select the key tone 、battery low alert 、power ringtone and dial tone.
Note1: After plugging in the headset, ringtone will output from the headset as well as the phone, when there is incoming call or message.