Справочник Пользователя для Shenzhen Yingdakang Technology Co. LTD DWA-N223SERIES
33
●
WPS Settings
: Select to enable/disable the WPS encryption. It is
enabled by default.
●
WPS Mode
: Select PBC (Push-Button Configuration) or PIN.
●
PBC
: Click this software button or directly press the hardware WPS
button on both your router and the new wireless client device (that you
want to connect to your router wirelessly) for 1 second to establish an easy
and secure wireless connection.
want to connect to your router wirelessly) for 1 second to establish an easy
and secure wireless connection.
●
PIN
: To use this option you must know the PIN code from the wireless
client. Simply click the PIN radio button and enter client’s PIN code while
using the same PIN code on client side for secure connection.
using the same PIN code on client side for secure connection.
●
Reset OOB
: When clicked, the WPS LED will display a solid light; the
WPS function will be disabled automatically; WPS server on the Router
enters idle mode and will not respond to client’s WPS connection request.
enters idle mode and will not respond to client’s WPS connection request.
Note:
1. If you find the WPS LED blinking for 2 minutes after you select
and apply the PBC mode, it means that the PBC encryption method is
successfully enabled. And an authentication will be performed
between your router and the WPS/PBC-enabled wireless client
device during this time; if it succeeds, the wireless client device
connects to your device, and the WPS LED displays a solid light
thereafter. Repeat steps mentioned above if you want to connect
more wireless client devices to your router.
successfully enabled. And an authentication will be performed
between your router and the WPS/PBC-enabled wireless client
device during this time; if it succeeds, the wireless client device
connects to your device, and the WPS LED displays a solid light
thereafter. Repeat steps mentioned above if you want to connect
more wireless client devices to your router.
2. The WPS function can be implemented only between your
Router and another WPS-enabled device.
5.2.2 WPA-PSK
The WPA protocol implements the majority of the IEEE 802.11i
standard. It enhances data encryption through the Temporal Key Integrity
Protocol (TKIP) which is a 128-bit per-packet key, meaning that it
dynamically generates a new key for each packet. WPA also includes a
message integrity check feature to prevent data packets from being
hampered with. Only authorized network users can access the wireless
network.
Protocol (TKIP) which is a 128-bit per-packet key, meaning that it
dynamically generates a new key for each packet. WPA also includes a
message integrity check feature to prevent data packets from being
hampered with. Only authorized network users can access the wireless
network.