Справочник Пользователя для Shanghai IGOO Smartlamp Technology Co. Ltd IGOO1SL
IGOO Smartlamp User Manual
This operation instruction includes information on safety, operation supervision and warranty.
To avoid getting harmed, please read all the operation instructions and safety information
below before using IGOO.
IGOO smartlamp mainly includes a smartlamp body, a controller, a controller power adapter and
USB cable.
Smartlamp body input: 100-240V~50/60Hz 3.0A(Max) 100W
Smart control Adaptor input: 100-240V~50/60Hz 0.3A
First connect the power plug of the smartlamp body with AC power (100V-240V), the smartlamp
body will start up automatically. Press the power button on the controller for 3 seconds, the
controller will start up. The controller will connect to the smartlamp body automatically, which
can be controlled by the controller after connection.
Important Safety and Operation Information
Warning: Failure to follow these safety instructions could result in fire, electric shock, or other
injuries or damages to IGOO or other properties.
Smartlamp Body Operation
Avoid to place the smartlamp into water or moist environment. IGOO smartlamp is used
indoors and without waterproof performance. Therefore, please don’t place the body outdoors
or in the rain. There are electronic devices at the bottom of smartlamp body, so please don’t
place it in water or moist environment. Please don’t pour water in the mouth on the top of
smartlamp body.
Avoid covering the head. When smartlamp is in use, the head will normally generate heat.
Make sure it’s well ventilated around the smartlamp body, and don’t cover the smartlamp body
with things like clothes.
Place the smartlamp body at stable and level locations. Please place smartlamp body on
level ground or stand and make sure it’s stable without inclination. If it inclines, it may fall on the
ground, smartlamp body or the floor may be damaged.
Please don’t overexert to push smartlamp body. If overexert to push smartlamp body, it
may fall down to cause smartlamp body and even the floor be damaged.
Power cable of smartlamp body
Don’t plug/unplug the power cord with wet hands. If power cord or the plug is worn out or
damaged, please do not use it.