Справочник Пользователя для CertainTeed Gypsum Inc. 21000

2.  AutoPRO User Manual

machine operation  

   

Read manual carefully. Be thoroughly familiar with 
the controls and the proper use of the machine.

Follow all local electrical and safety codes, as well 
as the U.S.A., National Electrical Codes (NEC) and 
Occupational Safety and Health Act (OSHA). Only 
persons well acquainted with these rules should be 
allowed to use the machine.

Wear safety glasses and approved hearing 
protection when operating the machine.

Operate machine on dry, level surface. DO NOT lay 
machine on side.

Turn off machine when not in use.

Use only well-maintained equipment. Repair or 
replace damaged parts at once. Maintain unit 
according to this manual.

Keep all panels and covers securely in place.

All visitors (especially children) should be kept at a 
safe distance from the machine.

DO NOT use setting-type compounds in AutoPRO as 
they will damage the machine.

Structus recommends ready-mix All-Purpose joint 
compound ONLY for use in the AUTOPRO machine 
when running corners. 

DO NOT modify this machine with non-Structus 
products, as modification could affect performance, 
safety or durability. In addition, damage or 
performance problems resulting from modification 
may not be covered under warranty. AUTOPRO is 
engineered to be used with the LevellinePRO roll 
product ONLY.

AutoPRO is engineered to be used with the 
LevellinePRO roll product ONLY.

DO NOT store the AutoPRO machine in temperatures 
below 32˚ F.

Do not use a grounding adapter with this machine!

Improper use of grounding plug can result in a 
possible risk of electric shock!

All wiring and electrical connections should be 
performed by a qualified electrician. Installation 
must be in accordance with local codes and national 
electrical codes.

Motors, electrical equipment and controls can cause 
electrical arcs that will ignite a flammable gas or 
vapor. Never operate or repair in or near a flammable 
gas or vapor. Never store flammable liquids or gases 
in the vicinity of the compressor.

Do not wear loose fitting clothing while operating 
machine. Keep hands and loose fitting clothing away 
from moving parts.