Справочник Пользователя для Shenzhen L&Y Audio Co. LTD GM100

5

MASTER   

SLAVE

MASTER   

SLAVE

MASTER   

SLAVE

 * More than one piece RockStar can be set as SLAVE speaker, within the 10M distance wireless range from the MASTER speaker.

MASTER

SLAVE 1

SLAVE 2

Step 1. Choose one RockStar as Master speaker, turn it on and switch to MASTER, press button “2.4G/PAIR” for 3 seconds, 
              LED “2.4G” (Refer to Page 7) quick flash indicating searching for Slave speakers.
Step 2. Connect SLAVE 1 : Turn on the second RockStar and switch to SLAVE mode, press button “2.4G/PAIR” for 3 seconds, 
              pairing complete automatically after 3~5 second reaction.
Step 3. Connect SLAVE 2:   Press MASTER speaker’s “2.4G/PAIR” button for 3 seconds, then turn on the third RockStar and switch to SLAVE mode,  
              press button “2.4G/PAIR” for 3 seconds as well. Pairing complete automatically after 3~5 second reaction.
Step 4. If more SLAVE speakers to be connected, repeat Step 3 operation. 

*Wireless range: 10M between MASTER and SLAVE speakers.
*Under 2.4G pairing, SLAVE speakers are non-functional except the “2.4G/PAIR” button.
*To disconnect either SLAVE speaker from MASTER, press “2.4G/PAIR” on SLAVE speaker for 3 seconds.
*To disconnect all SLAVE speakers from 2.4G pairing, press “2.4G/PAIR” on MASTER speaker for 3 seconds. 
*Do not slide over the “OFF” position when switching from MASTER to SLAVE, shall pause at “OFF” for two seconds.