Справочник Пользователя для Prentke Romich Company ACN1000PRC
Installing a Wheelchair Mounting Plate
With the mounting plate in place, the device can be mounted on a table stand
or a wheelchair mount.
If you purchased the wheelchair mounting plate, you received the mounting
If you purchased the wheelchair mounting plate, you received the mounting
plate and four screws in a plastic bag.
Note: If you ordered a separate NuEye™ Tracking System, a different mounting plate will be needed. See
“Mounting a NuEye Module” on page 27.
1. Place the device-face down on a flat surface. Be careful not to scratch the display.
2. Line up the holes on the mounting plate with the four holes on the device circled in white below.
1. Place the device-face down on a flat surface. Be careful not to scratch the display.
2. Line up the holes on the mounting plate with the four holes on the device circled in white below.
3. Place the screws through the mounting plate into the device holes and tighten the screws.
Note: If you remove the mounting
plate at any time, be sure to store
the screws in a safe location. You
may need them later.
plate at any time, be sure to store
the screws in a safe location. You
may need them later.
Loose screws can be a choking
hazard.
Accent 1000 Hardware Manual
Page 23
PRELIMINARY