Справочник Пользователя для Ulterius Technologies LLC FDN40
CHAPTER 10: IPS-IDS
Configuration User Manual
210
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
10.3 IPS-IDS Configurations
10.3.1 Enabling and Disabling IPS-IDS Module
This section describes the steps involved in enabling and disabling the IPS-
IDS status globally. By default, IPS-IDS status is disabled.
IDS status globally. By default, IPS-IDS status is disabled.
10.3.1.1 CLI Configuration
To enable IPS-IDS:
1. Enter the Global Configuration mode.
1. Enter the Global Configuration mode.
UltOs# configure terminal
2. Enable the Firewall module.
UltOs(config)# firewall
UltOs(config-firewall)# enable
3. Enable IPS-IDS status
UltOs(config-firewall)# ips-ids enable
4. Exit from the Global Configuration mode.
UltOs(config-firewall)# end
To disable IPS-IDS:
5. Enter the Global Configuration mode.
5. Enter the Global Configuration mode.
UltOs# configure terminal
6. Enter firewall configuration mode.
UltOs(config)# firewall
7. Disable IPS-IDS status.
UltOs(config-firewall)# ips-ids disable
8. Exit from the Global Configuration mode.
UltOs(config-firewall)# end
To view the IPS status:
9. UltOs# show ips config
9. UltOs# show ips config
IPS Configuration
----------------------
IPS/IDS Status : Enabled
IDS Logging Status : Enabled
IPS Log file Size : 1048576
IPS Log file Size Threshold : 70
10.3.1.2 WEB Configuration
IPS-IDS global status is configured through WEB interface using IPS Basic
Settings screen (Home->Security Management->IPS)
Settings screen (Home->Security Management->IPS)