Справочник Пользователя для Ulterius Technologies LLC FDN40
FDN40
Configuration User Manual
258
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
14.3 Configuration Guidelines
The FDN40 CLI user manual can be referred for the complete set of
commands and the various options available for configuring QoS.
commands and the various options available for configuring QoS.
14.4 Default Configurations
Table 14-2: Default Configurations
Parameter
Default Setting
System Control
Start
System Control
Enable
Rate Unit
kbps
Rate Granularity
64
Trace Flag
0
14.5 QoS Configurations
14.5.1 Configuring QoS Subsystem
14.5.1.1 Enabling the QoS Subsystem
1. Execute the following commands to enable QoS on the target.
Enabling the QoS module programs the hardware and starts protocol
operation.
operation.
Enter the Global Configuration Mode.
UltOs# configure terminal
Enable the QoS.
UltOs(config)# qos enable
Exit theGlobal Configuration Mode.
UltOs(config)# exit
2 View the QoS related global information.
UltOs# show qos global info
QoS Global Information
----------------------
System Control : Start
System Control : Enable
Rate Unit : kbps
Rate Granularity : 64
Trace Flag : 0