Справочник Пользователя для Ulterius Technologies LLC FDN40
CHAPTER 15: OSPF
`FDN40ConfigUM/20160505
293
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
UltOs(config-if)# ip ospf authentication message-digest
˗ Exit from the Interface Configuration mode.
UltOs(config-if)# exit
˗ Exit from the configuration mode.
UltOs(config)# exit
2. View the configuration details by executing the following show commands.
In FDN40-2:
View the type of authentication configured.
UltOs# show ip ospf interface
0
vlan11 is line protocol is up
Internet Address 10.4.0.2, Mask 255.255.0.0, Area 0.0.0.0
AS 1, Router ID 10.4.0.2, Network Type BROADCAST, Cost 1
Transmit Delay is 1 sec, State 5, Priority 1
Designated RouterId 10.4.0.4, Interface address 10.4.0.4
Backup Designated RouterId 10.4.0.2, Interface address 10.4.0.2
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 0 sec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with the neighbor 10.4.0.4
Message digest authentication enabled
Youngest key id is 0
View the adjacency formation between the neighbors.
UltOs# show ip ospf neighbor detail
Neighbor 10.4.0.4, interface address 10.4.0.4
In the area 0.0.0.0 via interface vlan11
Neighbor priority is 1, State is FULL/BACKUP, 5 state changes
DR is 10.4.0.4 BDR is 10.4.0.2
Options is 0x2
15.5.11.2.2
WEB Configuration
OSPF Message Digest Authentication can be configured through WEB
interface using the OSPF Interface screen. For screenshot, refer section
4.5.3.2.
interface using the OSPF Interface screen. For screenshot, refer section
4.5.3.2.