Справочник Пользователя для Ulterius Technologies LLC FDN40
CHAPTER 2: SYSTEM FEATURES
Configuration User Manual
56
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
Screen 2-11: Image Upgradation using normal
3 Now software is ready for use.
4 Upgrade standby image through GUI on standby partition
4 Upgrade standby image through GUI on standby partition
Choose option Home->System->Image Download option.
Choose upgrade type as TFTP, address type as IPv4 and configure
tftp Server IP Address, image File Name and upgrade mode as Fall
Back for flashing image to standby partition and click apply. Once
image is downloaded, we should see the notification as “Image
Download Successful”
tftp Server IP Address, image File Name and upgrade mode as Fall
Back for flashing image to standby partition and click apply. Once
image is downloaded, we should see the notification as “Image
Download Successful”
Connect to the CLI prompt and type below command to restart system
for new image to get flashed to standby partition. This image would
normally boot up only when active image fails to get loaded
successfully.
for new image to get flashed to standby partition. This image would
normally boot up only when active image fails to get loaded
successfully.
UltOs# reload