Справочник Пользователя для Omnitracs LLC IVG2
80-JE026-1 Rev. J
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
106
Inspect the IVG Unit
Verify the IVG screen is clean. Omnitracs recommends that you use a soft cloth and either plain
water, glass cleaner, or mild soap to gently clean the surfaces of the IVG as well as the display
screen.
water, glass cleaner, or mild soap to gently clean the surfaces of the IVG as well as the display
screen.
CAUTION
The IVG is not watertight. Do not spray any liquid directly on the display screen.
Heavily soiled IVG units should be returned to Omnitracs using the RMA process for
proper cleaning.
proper cleaning.
Styluses are available for purchase through the Customer Portal. Do not use pencils, pens,
metal objects, or any other devices that could scratch the touchscreen.
metal objects, or any other devices that could scratch the touchscreen.
• Ensure that the display cable is not a tripping hazard.
• Verify that the display screen is readable in any lighting condition.
• Ensure that the display cable has enough slack and is not being rubbed or cut by
• Verify that the display screen is readable in any lighting condition.
• Ensure that the display cable has enough slack and is not being rubbed or cut by
anything inside the cab.
• Remove the IVG from the holster and make sure the RAM mount and screws holding
the holster in place are secure.