Справочник Пользователя для Omnitracs LLC IVG2
80-JE026-1 Rev. J
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
30
The PTO wire installation verification is complete. Now you can verify that the application is
recording data correctly.
recording data correctly.
PTO Data Verification
1. Start the vehicle and with the PTO switch ON, navigate to Performance Monitoring.
2. Navigate to the PTO screen, tap the Performance Monitoring button; then tap the PTO
2. Navigate to the PTO screen, tap the Performance Monitoring button; then tap the PTO
tab.
If the Performance Monitoring button is grayed out, Performance Monitoring is not
enabled and you must contact the company admin for Omnitracs to have it enabled.
Additionally, the IVG must download Performance Monitoring parameters for
Performance Monitoring metrics to be recorded correctly.
enabled and you must contact the company admin for Omnitracs to have it enabled.
Additionally, the IVG must download Performance Monitoring parameters for
Performance Monitoring metrics to be recorded correctly.
3. Verify that: PTO is Enabled, a green indicator light displays next to the active PTO
device, and the active Compressor or Pump displays a Y.
4. Check that the PTO Time field is incrementing.
• If yes, PTO verification is complete.
• If no, check the wire connections.
• If no, check the wire connections.
5. Turn off PTO device. PTO time should now stop incrementing.
For PTO time to be recorded in Performance Monitoring, RPM must be >0, speed <20
mph, and the customer-configured PTO time delay must be reached.
mph, and the customer-configured PTO time delay must be reached.