Справочник Пользователя для Omnitracs LLC IVG2
80-JE026-1 Rev. J
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
43
Problem: Touchscreen Non-responsive/Calibration
If you are tapping on the touchscreen and it is not responding quickly or the screen arrow is
not where the screen was touched, the touchscreen may not be calibrated properly.
not where the screen was touched, the touchscreen may not be calibrated properly.
To recalibrate the touchscreen settings
1. From the Home screen, tap the Settings button; then tap the Calibration tab.
2. Tap Calibrate.
3. When the targets display, carefully tap and hold down each of the targets (+) in the
2. Tap Calibrate.
3. When the targets display, carefully tap and hold down each of the targets (+) in the
center and release when instructed. It is best to use your finger to calibrate.
4. After the last target is touched, tap anywhere on the screen to save the calibration.
If you cannot get to the Calibration screen using the touchscreen, connect a USB mouse
to use as a pointer. After you get to the targets, use your finger to calibrate.
to use as a pointer. After you get to the targets, use your finger to calibrate.
5. If the touchscreen/display is still unresponsive, use the reset button on the left side of
the display to reboot the unit. It takes several minutes to reboot.