Справочник Пользователя для Omnitracs LLC IVG2
80-JE026-1 Rev. J
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
90
Approved Omnitracs
Electrical Connectors
The wiring for the IVG system is expected to be inside the cab. The only Omnitracs-approved
electrical connections other than standard connectors are insulated crimp butt-splices and
insulated crimp ring terminals. Connections are typically made by mating the two connectors.
Many of the following general guidelines apply to non-standard IVG connections where the
power I/O cable must be cut because it does easily mount in the truck’s dashboard.
electrical connections other than standard connectors are insulated crimp butt-splices and
insulated crimp ring terminals. Connections are typically made by mating the two connectors.
Many of the following general guidelines apply to non-standard IVG connections where the
power I/O cable must be cut because it does easily mount in the truck’s dashboard.
CAUTION
Not following proper wiring guidelines and using improper crimps and butt-splices may
cause intermittent connections and may result in unexpected truck down time or system
failure.
cause intermittent connections and may result in unexpected truck down time or system
failure.
Wire Stripping
CAUTION
Use care in stripping wires. Vibration can cause nicked wires to fail. Using wire cutters,
knives, or other tools can damage the conductor wire and/or insulation.
knives, or other tools can damage the conductor wire and/or insulation.
Knowing and following proper wire stripping techniques is essential for performing successful
and safe electrical connections of all system components.
and safe electrical connections of all system components.