Справочник Пользователя для Zivix LLC ZXB16
Description
The ZXB16 module is designed to work with the Apple MIDI specification for Bluetooth. It will work
with IOS devices and software (such as Garageband) that recognize this specification. IOS 8.0 and
above is required. When power is applied to the module, software such as Garageband will recognize
it as a valid connection option from within the program, so no additional drivers or interface is re-
quired. The module accepts serial data at the MIDI baud rate (31,250hz) and will format and transmit
this data. The module can also receive MIDI data sent to it wirelessly and provide a serial output.
with IOS devices and software (such as Garageband) that recognize this specification. IOS 8.0 and
above is required. When power is applied to the module, software such as Garageband will recognize
it as a valid connection option from within the program, so no additional drivers or interface is re-
quired. The module accepts serial data at the MIDI baud rate (31,250hz) and will format and transmit
this data. The module can also receive MIDI data sent to it wirelessly and provide a serial output.
Evaluation Module Connection Instructions
Connect a regulated source of 3.3VDC and GND as shown in the module diagram. Serial data at the
rate and format specified in the MIDI specification is applied to the RX pin of the module. This data is
in the same format as the last output stage of a MIDI current loop output and is the same signal that
would be applied to the current loop optoisolater - single ended with reference to GND.
rate and format specified in the MIDI specification is applied to the RX pin of the module. This data is
in the same format as the last output stage of a MIDI current loop output and is the same signal that
would be applied to the current loop optoisolater - single ended with reference to GND.
Testing with Garageband
Current versions of Garageband include the ability to connect directly to Bluetooth MIDI devices. In
the tools (settings) menu in Garageband, the end of the list has a selection for Bluetooth MIDI Devic-
es. After selecting this, there should be an option for a Z or ZX number—this is the Zivix module. Se-
lecting this and then activating the connection should deliver MIDI messages directly into Garageband
from the serial input of the module.
the tools (settings) menu in Garageband, the end of the list has a selection for Bluetooth MIDI Devic-
es. After selecting this, there should be an option for a Z or ZX number—this is the Zivix module. Se-
lecting this and then activating the connection should deliver MIDI messages directly into Garageband
from the serial input of the module.
Zivix LLC Bluetooth MIDI Module ZXB16
Operation Manual 02-17-15