Справочник Пользователя для B & M Merchandise LLC 1SP
Page | 4
coated windshields or wipers
Installation
The Radenso Pro windshield mount allows a firm and secure installation of the radar detector at the windshield of
your vehicle. Locate an area at the windshield that enables an unobtrusive installation with clear view to the road
ahead.
your vehicle. Locate an area at the windshield that enables an unobtrusive installation with clear view to the road
ahead.
1.
Place the nipple of the suction cups in the large
hole of the bracket und pull the suction cup into
the small hole to secure them. Push the rubber
damper into the hole in the middle of the bracket
hole of the bracket und pull the suction cup into
the small hole to secure them. Push the rubber
damper into the hole in the middle of the bracket
Rubber damper
2.
Attach the windshield mount to the desired area of the windshield. Make sure it is in a level position
parallel to the road ahead. To adjust the angle if necessary, gently push or pull on the bracket to bend
it. DO NOT use the detector to bend the bracket.
parallel to the road ahead. To adjust the angle if necessary, gently push or pull on the bracket to bend
it. DO NOT use the detector to bend the bracket.
3.
Insert the windshield mount into the slot at the
front of the detector until it is locked in position
front of the detector until it is locked in position
For firm and secure adherence to the windshield keep windshield and suction cups clean
4.
Plug the small end of the power cable into the detetcor (located on the left side) and the large end into
your vehicle’s 12V ACC socket.
your vehicle’s 12V ACC socket.
5.
To remove Radenso Pro from the windhield press the release button on top of the unit and slide the
unit off the mount.
unit off the mount.