Справочник Пользователя для Marine Instruments S. A. MPTR50
UM022EN M3P / M3P-T / M3P-R BUOYS. User Manual
Page 14 of 25
STEP 2.
Place the buoy in a clear location.
STEP 3.
Remove the magnet to turn it on.
STEP 4.
Check the green, red and white flashes. The flash can be enabled or disabled through the
buoy reprogramming.
buoy reprogramming.
STEP 5.
Before casting the buoy into the water, verify that the software has received at least one
position and that the buoy is shown on the chart.
position and that the buoy is shown on the chart.