Справочник Пользователя для Tesla Motors Inc 1089773E

•

Require Continuous Press (U.S. Only): By

default, Summon requires that you press
and hold a button on the mobile app to

move the vehicle during the parking
process. When you set Require
Continuous Press to NO, you can:
•

Park Model 3 by simply double
pressing the Park gear, specifying the

direction on the touchscreen (if
reversing), then exiting the vehicle.

•

Park or retrieve Model 3 with a single
touch of a button on the mobile app.

•

Use Auto HomeLink (if equipped): Set to
ON if you want to activate HomeLink to
open/close a programmed garage door

that meets safety standards during the
parking process. If enabled, the garage
door automatically opens and closes when
Model 3 enters or exits.
Note: This setting automatically opens
and closes the garage door only when

using Summon. To automate HomeLink in
other situations (such as when driving),
you must access the HomeLink device's
main settings by touching the HomeLink
icon on the top of the touchscreen (see 

 on page

101).

Warning: Do not use this setting with
gates or with a garage door that does

not meet safety standards. A garage

door opener that does not have
safety stop and reverse features
(cannot detect an object in its path
and then automatically stop and
reverse) does not meet these
standards. Using a garage door
opener without these features

increases the risk of injury or death.

Note: All settings associated with Summon are

retained until you manually change them.

Position the Vehicle for Parking
Before operating Summon, align Model 3
laterally with the parking space so Model 3
can move straight into the space in either

Drive or Reverse. You must also position
Model 3 within 39 feet (12 meters) of the

parking space (the maximum distance that
Summon can move Model 3).
If applicable, open your garage door. As
described earlier, this can be automated using
Auto HomeLink (if equipped).

Note: Use Summon on flat driveways only
where a raised concrete edge does not exceed
approximately 1 in (2.5 cm).

On the mobile app, start Summon and hold

down the forward or reverse button to move
Model 3 into the parking space. (U.S. Only): If
Require Continuous Press is set to NO (see 

 on page 71), you do not

need to hold down the button, just touch and
release.
Summon shifts Model 3 into Drive or Reverse
(based on the direction you specified) and
drives into or out from the parking space.

Note: Summon cancels if your phone enters
sleep mode or is turned off.

Vehicle (U.S. Only)
If Require Continuous Press is set to NO, you
can initiate the parking maneuver from inside
Model 3 before exiting:
1.

While sitting in Model 3 with the vehicle
powered on, double press the Park gear.
The touchscreen displays a message
indicating that Summon is engaged, and
the touchscreen displays a popup window.

2. On the touchscreen, choose the direction

of travel.

3. Exit Model 3 and close the door.

Note: All doors and trunks must be
closed.
Note: To cancel the parking maneuver
before exiting the vehicle, touch Cancel

on the popup window.

Note: If no direction of travel was selected

on the touchscreen, Model 3 will not
attempt the parking maneuver after you
exit the vehicle.

Summon now drives Model 3 into the parking
space according to the direction you specified

on the touchscreen.

Stopping or Canceling Summon
You can stop Model 3 at any time while
Summon is active by using the mobile app.

Summon also cancels when:

•

A door handle is engaged or a door is

opened.

•

You interact with the steering wheel, brake
pedal, accelerator pedal, or gear stalk.

72

Model 3 Owner's Manual

DRAFT 

DO 

NOT 

DISTRIBUTE