Справочник Пользователя для Pyott Boone Electronics Inc. PAS400
Model PAS Proximity Alert System Manual
Page 9 of 25
The Dropout zone is the artificial maximum range beyond which objects will disappear from the PAS screen. Its purpose
is to limit distraction and reduce on-screen clutter by dropping objects that are not in the vicinity of the driver, which
would otherwise be displayed due to the extended tag communications range.
is to limit distraction and reduce on-screen clutter by dropping objects that are not in the vicinity of the driver, which
would otherwise be displayed due to the extended tag communications range.
The Mid/Far and Close/Mid values define the two boundaries between three arbitrary range classification zones; Close,
Mid and Far. The Mid/Far value must be higher than the Close/Mid value. The number of objects in each of these three
zones is indicated in the four corners of the PAS screen for each object type. Each of the three zones has its own color,
which is used to highlight the object’s distance displayed in the tag list; Close is red, Mid is orange and Far is yellow.
Mid and Far. The Mid/Far value must be higher than the Close/Mid value. The number of objects in each of these three
zones is indicated in the four corners of the PAS screen for each object type. Each of the three zones has its own color,
which is used to highlight the object’s distance displayed in the tag list; Close is red, Mid is orange and Far is yellow.
The Urgent zone defines the range within which an object will trigger the urgent alarm, light bar flashing and on-screen
highlighting of the object. The alarm can be acknowledged by pressing the PAS screen.
highlighting of the object. The alarm can be acknowledged by pressing the PAS screen.
To change a value, tap on the desired panel and then use the up and down arrows.
Audible Alerts
Figure 9: Audible Alerts menu screen
Select the amount of beeps sounded when an object comes into each specified zone. To change the value, tap on the
desired panel and cycle through the options: 1, 2, 3, or Off (then back to 1…). The Urgent alarm is either On or Off.
desired panel and cycle through the options: 1, 2, 3, or Off (then back to 1…). The Urgent alarm is either On or Off.