Справочник Пользователя для GUANGZHOU TAIMA ELECTRONICS TECHNOLOGY LTD. TS4500HA

Скачать
Страница из 5
 
 
 
P/S2 keyboard cable   
RS232
RS232   cable  RJ45   side  to  con
nect   ⑧ ,the  other 
side to connect PC.   
 
RS232 
cable
 
Typically, cradle is able to identify the data port type automatically. 
In extreme cases cradle port may need setting manually if the host 
fails to identify it. 
Note: Pairing before set interface type. 
Automatic Identification 
(Default) 
                                              USB   
PS/2                                               
 
                      RS232  
                 
Step 2.
 Put the scanner onto the cradle like below picture. 
 
Place the Scanner 
Step3.
 Press cradle middle button①(Pfor about 4 seconds, until 
the Scanner issued a "beep beep" sound. 
Note: A cradle is able to work with as more as 100 scanners at the 
same time. After a Scanner pairing with Cradle, the cradle can 
receive the data from the scanner. 
Usage of Scanner 
Power Up/Power Down 
Scanner wi ll be  power up  whe n the  trigg er  is cl icked. W hen the  
scanner  is not  operated for 30 s, it will  enter power down  mode 
automatically  
Charging 
Position the scanner onto the cradle. 
Note:The scanner power i ndicator beco mes green and  keeps 
flashing when the scanner is low power.
 
Built-in Data Memory 
When the scan ner  is out of  communication  area of  the  cradle, the  
scanner will save th e bar code da ta i n bui lt-in da ta me mory.  The 
scanner will send the data to the cradle automatically when the scanner 
gets back to the communication area. 
The scanner data indicator will become red. After finish sending data, 
the indicator will to be green.   
 
More Than One Cradle Work In The Same Space
 
When there are more than one cradles working in the same space, it 
is better to set every cradle work in different channel. Channel is set 
as follows:
 
1. Open a notepad or other text editor.
 
2. Press the cradle Channel increase or decrease button.   
3. Pairing the scanner and cradle.
 
Note: After changing the channel of a cradle pairing is need.
 
When more than one cradle work in the sa me channel, it will reduce the  
bar code data transmission speed, but no any other problems. 
 
 
 
  Indicator & Button 
Scanner Indicator 
Status 
Left 
Light 
Scan Success 
Bright Red 1sec 
Bright Red 1sec 
Power on 
Green  
Low Power 
Green flashing 
 
Charging 
Red flashing 
 
Finish charge 
Yellow  
 
No  data  stored  in 
 Green