Справочник Пользователя для Azlan Logistics Limited SB-1900P

Note:
•  Installation must be carried out by qualified 

personnel only. Incorrect assembly can 
result in severe personal injury and property 
damage (if you intend to install this product 
yourself, you must check for installations such 
as electrical wiring and plumbing that may 
be buried inside the wall). It is the installer’s 
responsibility to verify that the wall will safely 
support the total load of the Soundbar and 
wall brackets.

•   Additional tools (not included) are required 

for the installation.

•   Do not overtighten screws.
•   Keep this instruction manual for future 

reference.

•   Use an electronic stud finder to check the 

wall type before drilling and mounting.

1.  Drill 4 parallel holes (Ø 5.5-6 mm each 

according to wall type) in the wall. The 
distance between the holes should be   

756 mm.

2.  Firmly fix 1 dowel into each hole in the wall if 

necessary. Tighten the wall mount brackets 
on the wall with screws and screwdriver (not 
included). Make sure that they are securely 
installed.

3.  Remove the screws at the back of the unit. 

Install the wall mounting screws into the 
back of the unit.

4.   Lift the unit onto the wall mount brackets 

and slot into place.