Справочник Пользователя для HAMATON AUTOMOTIVE TECHNOLOGY CO. LTD PHT220
TPMS Sensor Installation Instructions
Installation:
The Snap-In and Clamp-In valve stems are interchangeable, however, we (Hamaton) recommend using
the same valve stem style as the OEM for safety reasons on speed rated and high pressure applications.
Clamp-in instructions
1. Before installing the sensor, make
sure the rim hole is clean and free of dirt and
debris to ensure a proper seal.
2. Remove the valve cap and nut from the sensor
assembly.
3. Insert valve stem/sensor assembly through rim
hole from the inside of the wheel. The rubber
grommet should be firmly seated on the inside of
the valve hole of the rim.
4. Holding the sensor assembly in place, hand
tighten the nut until snug.
5. Securely fasten the valve stem/sensor assembly to the
wheel by tightening the 12mm nut to 44in-lbs (5N-m)
sure the rim hole is clean and free of dirt and
debris to ensure a proper seal.
2. Remove the valve cap and nut from the sensor
assembly.
3. Insert valve stem/sensor assembly through rim
hole from the inside of the wheel. The rubber
grommet should be firmly seated on the inside of
the valve hole of the rim.
4. Holding the sensor assembly in place, hand
tighten the nut until snug.
5. Securely fasten the valve stem/sensor assembly to the
wheel by tightening the 12mm nut to 44in-lbs (5N-m)
using an in-lbs torque wrench.
6. The wheel is now ready for tire mounting.
6. The wheel is now ready for tire mounting.
Snap-in instructions
1. Before installing the sensor, make
sure the rim hole is clean and free of dirt and
debris to ensure a proper seal.
2. Apply mounting lube to the rubber snap-in valve
stem.
3. Align the sensor assembly with the rim hole and
attach a standard valve installation tool.
4. Pull the valve stem straight into the rim hole
until the stem is properly seated.
5. The wheel is now ready for tire mounting.
sure the rim hole is clean and free of dirt and
debris to ensure a proper seal.
2. Apply mounting lube to the rubber snap-in valve
stem.
3. Align the sensor assembly with the rim hole and
attach a standard valve installation tool.
4. Pull the valve stem straight into the rim hole
until the stem is properly seated.
5. The wheel is now ready for tire mounting.
Warning
TPMS Installation is for Professionals Only. Read and follow all instructions and warnings before installing.
Improper installation may result in failure of the vehicle Tire Pressure Monitoring System sensor to operate as
designed. Please refer to the Hamaton application guide or www.hamaton.com, and the information of the
reprogramming process of TPMS of OEM. Hamaton Sensor assemblies are designed as replacement or
maintenance parts for automotive and light truck vehicles that have an Original Equipment Manufacturers (OEM)
factory installed TPMS system.
Improper installation may result in failure of the vehicle Tire Pressure Monitoring System sensor to operate as
designed. Please refer to the Hamaton application guide or www.hamaton.com, and the information of the
reprogramming process of TPMS of OEM. Hamaton Sensor assemblies are designed as replacement or
maintenance parts for automotive and light truck vehicles that have an Original Equipment Manufacturers (OEM)
factory installed TPMS system.
Important Note: Before installing the sensor, please read these instructions carefully and follow, proper
installation/usage guidelines.
Caution
Hamaton Sensor assemblies are designed and manufactured to operate in a specific motor vehicle application.
Please refer to the Sensor application guide or www.hamaton.com .for the specific vehicle application. Improper
installation or incorrect use of sensor application may result in the failure of the proper operation of the TPMS
system. Do not install the sensor assemblies in damaged wheels. The Sensor assemblies are designed and
manufactured to operate in Original Equipment (OE) wheels and tires only. If Original Equipment (OE) tires and/or
wheels are not used, the TPMS System and the low tire inflation warning threshold of the vehicle’s TPMS System
may not function or may function incorrectly. If Non-Original Equipment (OE) also known as “Aftermarket” wheels
and/or tires is installed, it is the responsibility of the owner to ensure that the TPMS system is working correctly.
Failure to follow the installation instructions or the use of the improper TPMS sensors may result in the motor
vehicles TPMS System failure causing property damage, personal injury or death.
Please refer to the Sensor application guide or www.hamaton.com .for the specific vehicle application. Improper
installation or incorrect use of sensor application may result in the failure of the proper operation of the TPMS
system. Do not install the sensor assemblies in damaged wheels. The Sensor assemblies are designed and
manufactured to operate in Original Equipment (OE) wheels and tires only. If Original Equipment (OE) tires and/or
wheels are not used, the TPMS System and the low tire inflation warning threshold of the vehicle’s TPMS System
may not function or may function incorrectly. If Non-Original Equipment (OE) also known as “Aftermarket” wheels
and/or tires is installed, it is the responsibility of the owner to ensure that the TPMS system is working correctly.
Failure to follow the installation instructions or the use of the improper TPMS sensors may result in the motor
vehicles TPMS System failure causing property damage, personal injury or death.
HAMATON AUTOMOTIVE TECHNOLOGY CO.,LTD
Add:No.12 East Zhenxing Road, Linping Yuhang, Hangzhou, Zhejiang, China.
Add:No.12 East Zhenxing Road, Linping Yuhang, Hangzhou, Zhejiang, China.