Справочник Пользователя для HeartSine Technologies TRNRMT1
HeartSine PAD 350P Trainer User Manual 3
1) Ensure that the HeartSine PAD 350P Trainer is fully charged (see the Charging section of this
manual).
2) Place the HeartSine PAD 350P Trainer and the Trainer Pad-Pak on a flat surface. Push the Trainer
Pad-Pak into the opening of the HeartSine PAD 350P Trainer and listen for a “click” sound to ensure that
it is properly inserted.
3) Place the batteries supplied with your Trainer into the HeartSine PAD Remote Control.
Do not press any buttons whilst inserting the Remote Control batteries as this will reset the
Remote Control ID.
4) Press the On/Off button on the HeartSine PAD 350P Trainer and listen to the voice prompts to
ensure that the unit is functioning.
5) If the HeartSine PAD 350P Trainer has insufficient charge, it will not function correctly. When switched
on, the Status Indicator will flash red to indicate that charging is required. If the battery is fully depleted
the device will not power on at all. For full charging instructions see the Charging section of this manual.
Turning on and off the HeartSine PAD 350P Trainer
To turn on the HeartSine PAD 350P Trainer press the green On/Off button.
By default the Trainer will function in the last scenario setting used.
To turn off the HeartSine PAD 350P Trainer press the On/Off button again.
Once the HeartSine PAD 350P Trainer has been turned on, it may be turned off using the accompanying
Remote Control. To turn the Trainer off press the Off button (red button) on the Remote Control.
When turned on the HeartSine PAD 350P Trainer will automatically turn off after fifteen
minutes if the device is not being used.
Preparing the HeartSine PAD 350P Trainer for Use