Справочник Пользователя для Baicells Technologies Co. Ltd. EG7035
12
Setting Scan Mode
4.2.5
To set the LTE network scan mode, perform the following steps:
1.
Choose Network Setting>LTE Setting.
2.
In the LTE setting area, you can set the scan mode.
3.
You can choose full Band, PCI Lock, or a band the CPE supported.
Figure 4-5 Setup Scan Mode
Setting Frequency (Earfcn)
4.2.6
To set the frequency, perform the following steps:
1.
Choose Network Setting>LTE Setting.
2.
In the LTE setting area, click to set the frequency.
3.
In the Frequency Setting area, you can choose a band, then click Add list to
choose an Earfcn Number.
4.
Click Submit .