Справочник Пользователя для Shenzhen XinJiao Du Technology Development CO. Ltd. XJDX6

1.4. Install the SIM card and memory card

1.4.1. The SIM card

You must before the use of mobile phones in the mobile phone to insert valid SIM card (user identity

recognition module).SIM card provided by the network provider.

That are closely related to establish a network connection information is recorded in the SIM card chip, recorded in the

card together with you in a SIM card phone book store name, telephone number, and short messages.SIM card can be removed

from your mobile phone, into the arbitrary a GSM mobile phone use (novice the opportunity to automatically read the SIM card).

In order to prevent loss or damage the information in the SIM card, should avoid to touch the metal contact surface, and

put a SIM card from electric, magnetic place.SIM card once damaged, you will not be able to normal use of mobile phones.

Note: be sure to turn off your phone before take out the SIM card. Absolutely prohibited in the case of the

power supply is connected insert or remove the SIM card, otherwise may damage the SIM card and cell

phones.

1.4.2. Insert and take out the SIM card

SIM card metal contact surface, it's easy to damage. Removed before assembly, must be careful.

Turn off the phone, remove the back cover, battery or other external power source;

In accordance with the instruction of the SIM card slot above, hold the SIM card into the direction of the arrow with his

fingers moving into the card slot.

The installation of SIM card 1/2 the same operation.

Take out the SIM card, direct to gently pull can take out the SIM card.

Note: in this article shows that if there are no special instructions, all is according to insert 2 SIM CARDS to

illustrate, if you only put 1 SIM CARDS, so some may not display the menu.

1.4.3. The memory card (SD card/T - Flash card)\

Remove the back cover and battery, storage card slot above follow the instructions given by the fingers holding the

memory card to the direction of the arrow into the can.

Note: if the memory card down, please check whether the correct placement and good metal contacts.

1.5. The battery

1.5.1. Install batteries

Remove the phone back cover.

Aim the batteries with one end on the surface of the metal in the mobile phone battery connector.

Again with your fingers gently press down the battery the other side can install batteries.

Note: please correct operation in case of damage to the battery connector.

1.5.2. The charging

Use the charging line of form a complete set, insert the USB port of charging line is located in the first cell phone side the

charging interface, and then insert the plug of the charging line power supply interface.

If the boot state, after insert the plug, the battery strength ICONS at the top right of the screen stripe has begun rolling said

charge, when the stripe is full of the whole icon and stop scrolling, said the battery has been completed; Charging is completed

in accordance with the charger on both sides of the button to pull the plug. If turned off, the screen display full screen scroll