Справочник Пользователя для Doodle Labs Pte Ltd NM-2450-2F
Port Protection
Receiver LNA Gain +10 dB
Receiver Adjacent
Channel Rejection
(ACR)
Receiver LNA Gain +10 dB
Receiver Adjacent
Channel Rejection
(ACR)
>38 dB @ 11g, 6 Mbps (Typ)
Receiver Alternate
Channel Rejection
(ALCR)
Channel Rejection
(ALCR)
>42 dB @ 11g, 6 Mbps (Typ)
Receive chain
Noise Figure
Noise Figure
+6 dB
Transmitter
Adjacent Channel
Leakage power
Ratio (ACLR)
Adjacent Channel
Leakage power
Ratio (ACLR)
45 dB (Fc ± ChBW)
Transmitter
Spurious Emission
Suppression
Spurious Emission
Suppression
-40 dBc
RF Hardware
Disable (RF Kill)
Disable (RF Kill)
Pin 20 of miniPCI-E interface. (Required for FAA compliance)
Control for External
Power Amp
Power Amp
Available as an optional configuration
RF Power control
In 0.5 dBm steps. Accuracy of power calibration loop ±2 dBm. Each transceiver
individually calibrated and tested.
individually calibrated and tested.
PHYSICAL, ENVIRONMENTAL AND OTHER SPECIFICATIONS
Antenna Ports
2 MMCX Ports (50 Ohms)
Host CPU Board
Any CPU board with Industry standard miniPCI-Express interface with
minimum 6 mm connector height
minimum 6 mm connector height
Operating
Voltage
Voltage
available for 6V~38V power
input.
Power
Consumption
Consumption
Total 16W (14W @ Max power for FES, in data transfer mode on all chains + 2W
for radio module)
Total 10W (8W @ 20 dBm power for FES in continuous data transfer mode on all
chains + 2W for radio module)
for radio module)
Total 10W (8W @ 20 dBm power for FES in continuous data transfer mode on all
chains + 2W for radio module)
1.2
W total power in continuous data receive mode
Shield case
temperature
range (Operating)
temperature
range (Operating)
-40°C to +80°C
The System’s thermal design should ensure that the transceiver’s shield case
temperature is maintained within these specifications.
The System’s thermal design should ensure that the transceiver’s shield case
temperature is maintained within these specifications.
Prism-FES can be mounted away from the host CPU board for better
thermal design
thermal design
Cable Assembly
Includes the harness with RF cable and DC power for Prism-FES
Humidity
(Operating)
(Operating)
0% – 95% (Non-condensing)
Dimensions
1x 30 x 50 x 6 mm Radio module, 2x 30 x 52 x 7 mm FES modules, 14 +
2×23 = 60 grams
Mechanical drawing and 3D-CAD files available upon request
2×23 = 60 grams
Mechanical drawing and 3D-CAD files available upon request
Regulatory
Requirements
Requirements
Designed and Verified to meet various regulatory requirements. Formal
testing and approval is required based on the Integrator’s particular host
platform. The Integrator is also responsible for obtaining any other
testing and approval is required based on the Integrator’s particular host
platform. The Integrator is also responsible for obtaining any other