Справочник Пользователя для SolarEdge Technologies Ltd SEZB
ZigBee Module User Manual - MAN-01-001xx-1.0
Appendix A: Configuring ZigBee
Communication
Communication
The inverter is set by default to slave for the
ZigBee connection. ZigBee is automatically
enabled during the discovery of the inverter by
the master. Enabling or configuring ZigBee is not
required. Use this procedure only if the default
settings have been changed.
ZigBee connection. ZigBee is automatically
enabled during the discovery of the inverter by
the master. Enabling or configuring ZigBee is not
required. Use this procedure only if the default
settings have been changed.
The inverter can be configured using the external
LCD light button. When using this option, opening
the inverter cover is not required in order to set it
up.
LCD light button. When using this option, opening
the inverter cover is not required in order to set it
up.
It is recommended to keep the gateway close to
the inverter during configuration.
the inverter during configuration.
►
To configure the Inverter Using
the LCD Light Button:
the LCD Light Button:
The following figure illustrates the inverter
connector panel:
connector panel: