Справочник Пользователя для Gogoro Taiwan Limited GOGORO2
Replacing batteries
1.
Park the scooter firmly beside a GoStation®. Extend the side stand, or
hold the brake lever down and lightly press the
“GO” button, to
shut off the motor.
2.
Open the seat. Hold the handle of one of the Gogoro® batteries to pull it
out.
out.
3.
Insert the battery into an empty GoStation® slot and push it all the way
until it’s locked and you hear a confirmation sound.
until it’s locked and you hear a confirmation sound.
4.
When the screen says “Please insert your other battery” repeat the
instructions in Step 2 and 3.
instructions in Step 2 and 3.
5.
Two fresh batteries will pop out a few seconds after you successfully
returned the drained ones.
returned the drained ones.
6.
Insert the fresh batteries into your scooter, put down the seat and wait
for the ⚠ warning symbol to disappear; when it’s done, unlock the scooter
and you are ready to roll. (Please refer to chapter 3 for unlock and turn
motor into Standby Mode instructions.)
for the ⚠ warning symbol to disappear; when it’s done, unlock the scooter
and you are ready to roll. (Please refer to chapter 3 for unlock and turn
motor into Standby Mode instructions.)